frequently asked questions
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Due to the
a) Type and surfaces of adhesive application
b) Temperature conditions (the temperature of applying glue during production, the temperature of storage and storage of goods after production)
c ) Field of application of the product
The appropriate grade is determined for each customer.
According to the type of application, the optimal application temperature of each adhesive differs, and this information is typically contained on the cartons and bags, TDS and analysis reports of each adhesive. You can contact the sales engineering unit if you have a significant question.
Hot melt adhesives have different polymer bases and each one is formulated for a specific application, and the combination of these adhesives, if their polymer bases are not compatible, will cause clogging of the nozzles and cause problems in the production process.
Hot melt adhesives are usually kept away from sunlight, at room temperature and away from cold and extreme heat.
Every time a product is created with a specific batch number, each batch number is tested in the quality control laboratory, and the form relating to its analysis is submitted as a product in the logistics unit. Each product’s batch number is its identification card, and by using it, you can access all of its registered specs.
To clean the pollution caused by adhesives, you can use the Tight Clean solvent, which is part of the product portfolio of Almas Fanaveran Giti, which is very easy to use and cleans the tank, hoses and nozzles completely.
Temperature settings and viscosity are two important factors in creating this process. If you have this problem, contact the sales engineering unit to check the solution.
Temperature settings and viscosity are two important factors in creating this process. If you have this problem, contact the sales engineering unit to check the solution.
No, these adhesives do not burn due to their polymer materials and are less dangerous than solvent adhesives.
Yes, as long as the properties of the glue do not change, carbonate can be added to it for various applications.
Yes, Almas FanAvaran’s diamond adhesives have standard approval and are used by many companies.
No, Gitace adhesives are made of plant materials and are completely compatible with the skin and do not harm the skin.
Yes, Hot Melt adhesives have reproducibility in melting and they can be re-melted and used many times after cooling.
No, these adhesives are not harmful to nature, and this process does not have any waste for pollution, and all the waste from the adhesive is re-entered into the production process.
Yes, these products are hydrophobic and are also used to prevent the penetration or passage of water.
No, the Easy Melt film used in the packaging of adhesives is made of the adhesive itself and melts completely with the adhesive and does not change the properties of the adhesive.